Product Code: 0124-1
Hardening accelerator for concrete (ELOT EN 934-2: T7). It accelerates the process of growth of initial strength of concrete without negatively affecting the final strength. It is recommended for fast removal of formwork and a rapid return to service (e.g. road repairs).
|Available Color(s)||Dark Yellow|
|Available Size(s)||1400 kg||290 kg||20 kg ||5 kg|
|Consumption||1 - 2 kg per 100 kg of cement, depending on the desired result|
|Coverage Imperial||N/A||N/A||N/A |
|Units Per Pallet||1||2||39||72|
Categories: Concrete & Mortar Admixtures, Concrete Admixtures
Concrete set retarder with plasticizing properties (ASTM C-494 type D, ELOT EN 934-2: T10). It increases setting time of concrete (delays setting) and improves its workability and physical properties. It enables transport of ready-mixed concrete over long distances.
Liquid polycarboxylic-based admixture acting as concrete superplasticizer. When added during preparation of concrete, reduces water demand up to 30%. When added to the ready-mixed concrete improves significantly its workability (self-compacting concrete), without need of additional water.
Concrete superplasticizer. When added to ready-mixed concrete, it increases workability without decreasing strength. When added during concrete preparation, it reduces the amount of water required (reduction of w/c ratio), thus increasing both initial and final strength.
Paraffin-based water emulsion for protecting fresh concrete from quick evaporation of mixing water. It ensures full hydration of cement, thus reduces any drying shrinkage cracks. It is usually applied on large surfaces of exposed concrete such as industrial floorings, parking areas, concrete slabs etc. In case of subsequent layers on the concrete surface, ISOCURE must be removed by water blasting.