Product Code: 0335-3
Polymer-modified, cement-based adhesive. Suitable for fixing mineral wool boards on cement-based substrates. Moreover, when reinforced with fiberglass mesh and applied on the exterior side of fixed mineral wool boards, it is the ideal substrate for the subsequent layer of render. It is classified as GP CS IV, W2 rendering mortar, according to EN 998-1.
|Available Size(s)||25 kg|
As adhesive: 5 kg/m²
As reinforced mortar: 1.5 kg/m²/mm
As adhesive: 5 m²
As reinforced mortar: 16.7 m²/mm
As adhesive: 53.8 ft²
As reinforced mortar: 179.7 ft²/mm
|Units Per Pallet||54|
Categories: Adhesives for Special Applications, Adhesives for Stucco, Paints & Stucco, Tile Adhesives & Grouts
Light-weight, elastic adhesive for fixing ceramic and porcelain tiles on deformable substrates. It is characterized by extended open time, no vertical slip and high elasticity. Also suitable for fixing natural stone and decorative bricks on concrete, screeds, render etc. Ideal in case high elasticity and adhesion are required like old tile layers, gypsum boards etc. For indoor and outdoor applications, on walls and floors. It is classified as C2 TE S2 adhesive, according to EN 12004 and EN 12002.
High quality, polymer-modified, cement-based, non-slip tile adhesive. Suitable for fixing absorptive or non-absorptive tiles (e.g. “gres porcelanato”), large tiles etc. on walls or floors on substrates with high demands for adhesion, elasticity and moisture resistance (e.g. old tile layers, floors with in-floor heating etc.). Possesses increased open time. For indoor and outdoor applications.
WATERPROOFING & UNCOUPLING MEMBRANE
Suitable for waterproofing and uncoupling sound on problematic substrates.
Highly-penetrative, polymer emulsion used as adhesion primer on smooth, absorbent or non-absorbent substrates, before the application of cement-based tile adhesives.