Product Code: 0335-3
Fibre-reinforced, polymer-modified, cement-based non-slip adhesive. Suitable for fixing thermal iinsulation polystyrene boards on cement-based substrates. Moreover, when reinforced with fibreglass mesh and applied on the exterior side of fixed thermal insulation boards, it constitutes the ideal substrate for the subsequent MARMOCRET PLUS or MARMOCRYL layer. Possesses increased open time.
|Available Size(s)||25 kg|
As adhesive: 2 - 4 kg/m²
As reinforced mortar: 1.5 kg/m²/mm
As adhesive: 6.3 - 12.5 m²
As reinforced mortar: 16.7 m²/mm
As adhesive: 67.8 - 134.5 ft²
As reinforced mortar: 179.7 ft²/mm
|Units Per Pallet||54|
Categories: Adhesives for Special Applications, Adhesives for Stucco, Paints & Stucco, Tile Adhesives & Grouts
Polymer-modified, cement-based tile adhesive with increased open time. After mixing with water, it becomes fluid. Suitable for thick layers (up to 20mm). Fields of application: Fixing absorptive and non-absorptive floor tiles on various surfaces. Ideal for fixing large tiles by ‘full-bed’ laying and in case of leveling and fixing tiles on irregular substrates. For indoor and outdoor applications. It is classified as C2 E S1 adhesive, according to EN 12004 and EN 12002.
Ready-to-use acrylic water-based primer. Stabilizes weak, loose or crumbling plasters.
Polymer-modified, cement-based tile adhesive. Suitable for fixing granite tiles and generally absorptive or non-absorptive wall or floor tiles on various substrates such as concrete, brickwork, plaster etc. For indoor and outdoor applications.
Cement-based tile adhesive. Suitable for fixing ceramic tiles on walls or floors on surfaces made of concrete, brickwork, plaster etc. For indoor and outdoor applications.