Product Code: 0111-1
Concrete superplasticizer (ASTM C-494, type A, D & G, ELOT EN 934-2: T11.1 and T11.2). When added to ready-mixed concrete, it increases workability without decreasing strength. When added during concrete preparation, it reduces the amount of water required (reduction of w/c ratio), thus increasing both initial and final strength.
|Available Color(s)||Dark brown|
|Available Size(s)||1000 kg||250 kg||20 kg ||5 kg|
|Consumption||As superplasticizer (Type G): 0.6 - 0.8 kg per 100 kg of cement|
At smaller dosages, it acts as a plasticizer
|Coverage Imperial||N/A||N/A||N/A ||N/A|
|Units Per Pallet||1||2||39||72|
Categories: Concrete & Mortar Admixtures, Concrete Admixtures
Concrete set retarder (ASTM C-494, type B, ELOT EN 934-2: T8). It increases setting time of concrete (delays setting) and improves its workability and physical properties. It enables transport of ready-mixed concrete over long distances.
Concrete set retarder with plasticizing properties (ASTM C-494 type D, ELOT EN 934-2: T10). It increases setting time of concrete (delays setting) and improves its workability and physical properties. It enables transport of ready-mixed concrete over long distances.
Water-based, acrylic emulsion for protecting fresh concrete from quick evaporation of mixing water. It ensures full hydration of cement, thus reduces any drying shrinkage cracks. It is usually applied on large surfaces of exposed concrete such as industrial floorings, parking areas, concrete slabs etc. It is also suitable for vertical surfaces. There is no need for removing ISOCURE-A in case of subsequent layers on the concrete surface.
Liquid polycarboxylate-based admixture acting as a concrete superplasticizer according to ELOT EN 934-2: T11.1 and T11.2. When added during preparation of concrete, it reduces water demand up to 20%. When added to the ready-mixed concrete, it significantly improves its workability (self-compacting concrete) without need for additional water. Ideal for long-distance transport of ready-mixed concrete when long slump retention and workability are required.