Product Code: 0116-1
Admixture for tile adhesives and joint grouts. It significantly improves properties such as bonding to the substrate, abrasion resistance, water-impermeability.
|Available Size(s)||20 kg||5 kg||1 kg|
|Consumption||Added to the mixing water at a ratio of DS-99 : water = 1:1 to 1:2|
|Units Per Pallet||39||72||324|
Categories: Concrete & Mortar Admixtures, Mortar Admixtures
Concrete set retarder with plasticizing properties (ASTM C-494 type D, ELOT EN 934-2: T10). It increases setting time of concrete (delays setting) and improves its workability and physical properties. It enables transport of ready-mixed concrete over long distances.
Polymer latex (SBR). Improves the properties of mortars in several ways offering, e.g. increased bonding to substrate and flexibility, shrinkage reduction, higher resistance to chemical effects and abrasion, enhanced water impermeability etc. Ideal for creating the bonding layer between old and new concrete or mortar.
Water-based, acrylic emulsion for protecting fresh concrete from quick evaporation of mixing water. It ensures full hydration of cement, thus reduces any drying shrinkage cracks. It is usually applied on large surfaces of exposed concrete such as industrial floorings, parking areas, concrete slabs etc. It is also suitable for vertical surfaces. There is no need for removing ISOCURE-A in case of subsequent layers on the concrete surface.
Concrete set retarder (ASTM C-494, type B, ELOT EN 934-2: T8). It increases setting time of concrete (delays setting) and improves its workability and physical properties. It enables transport of ready-mixed concrete over long distances.