DUROFLOOR-CMT

Product Code: 0422-2
Three-component, epoxy-cement, self-leveling flooring, solvent-free. It is used for repairing and levelling of cement-based floors that are going to be covered with DUROFLOOR epoxy systems, polyurethane coatings, plastic flooring, wooden flooring etc. It is also applied in cases where the floor is relatively fresh or is stressed by rising damp in order to create the proper substrate for the application of epoxy layer, to avoid problems of detachment.
Features:
Available Color(s) | Grey |
Available Size(s) | 25 kg (A+B+C) |
Consumption | 2.1 kg/m²/mm |
Coverage Metric | 11.9 m²/mm |
Coverage Imperial | 128 ft²/mm |
Units Per Pallet | 54 |
Categories: Epoxy, Polyurethane, Polyaspartic and Polyurea Floor Coatings, Floorings
Related products
-
EPOMAX-MT
Three-component, high-strength, pourable, , non-shrinking epoxy grout.
-
UNI-PRIMER
Ready-to-use acrylic water-based primer. Stabilizes weak, loose or crumbling plasters.
-
DUROCRET-DECO
Colored, decorative cement mortar for surface finishing on floors and walls.
-
SCREED-SX
Rapid setting, reinforced mortar that replaces the cement (binder) of floor screeds. It consists of special cements and special additives. After mixing with sand and water it is prepared a rapid setting cement mortar with high strength. Suitable for filling and leveling of floors, before laying tiles, marbles, natural stones, parquet, vinyl tiles, floors with underfloor heating system etc. Also for preparing cement mortar grade for terraces and outdoor areas.