DUROFLOOR-PU
Product Code: 0431-2
Two-component, colored aliphatic polyurethane coating without solvents, with excellent resistance to UV radiation. DUROFLOOR-PU is used as a coating on concrete floors, cement screeds, etc.
Features:
Available Color(s) | Grey, other RAL colors by special order (minimum quantity 150kg) |
Available Size(s) | 10 kg (A+B) |
Consumption | 250 - 300 g/m²/layer |
Coverage Metric | 33.3 - 40 m²/layer |
Coverage Imperial | 358.3 - 430.4 ft²/layer |
Units Per Pallet | 39 |
Categories: Epoxy, Polyurethane, Polyaspartic and Polyurea Floor Coatings, Floorings, Waterproofing Membranes Traffic/Parking Decks
Related products
-
VARNISH-PU 2KW
Aliphatic, water-based, two-component satin finish polyurethane coating.
-
SCREED-SX
Rapid setting, reinforced mortar that replaces the cement (binder) of floor screeds. It consists of special cements and special additives. After mixing with sand and water it is prepared a rapid setting cement mortar with high strength. Suitable for filling and leveling of floors, before laying tiles, marbles, natural stones, parquet, vinyl tiles, floors with underfloor heating system etc. Also for preparing cement mortar grade for terraces and outdoor areas.
-
SUPERGRUND
An adhesion primer for roughening the substrate surface.
-
DUROPRIMER-SG
Two-component, solvent-free moisture mitigating epoxy primer. It is used as a waterproofing layer on floors that are subject to rising damp and will be covered with epoxy flooring systems or cement screeds.