Product Code: 0402-2
2-component, water-based epoxy primer. It is used as a primer for cement-based substrates, e.g. concrete or cement-screeds, which will be covered with epoxy layers of DUROFLOOR system. It can also be used as a primer of ISOFLEX-PU when applied over non-absorptive substrates or over old waterproofing layers.
|Available Color(s)||Light yellow|
|Available Size(s)||10 kg (A+B)|
|Consumption||200 - 300 g/m²|
33.3 - 50 m²
|Coverage Imperial||358.3 - 538 ft²|
|Units Per Pallet||39|
Categories: Epoxy, Polyurethane, Polyaspartic and Polyurea Floor Coatings, Floorings
Rapid setting, reinforced mortar that replaces the cement (binder) of floor screeds. It consists of special cements and special additives. After mixing with sand and water it is prepared a rapid setting cement mortar with high strength. Suitable for filling and leveling of floors, before laying tiles, marbles, natural stones, parquet, vinyl tiles, floors with underfloor heating system etc. Also for preparing cement mortar grade for terraces and outdoor areas.
Cementitious screed for filling and leveling floors to be covered with tiles, marble, parquet etc., as well as for forming slopes on terraces. It replaces non-reinforced concrete or gas-concrete. Applied at a thickness of up to 10 cm per layer.
Flexible, polymer-modified, fiber-reinforced microcement coating. It shows very good bonding to the substrate, water repellency, as well as abrasion resistance and resistance to contraction-expansion and vibration. Suitable for indoor and outdoor applications on gypsum boards, cement boards, in-floor heating floors, metal surfaces, etc.
FLOWCRET 1-10 EXPRESS
Fast-setting, self leveling, polymer-modified cementitious screed.