Product Code: 0127-1
Polymer latex. When added into the building mortars and coatings, it increases bonding to the substrate, provides water impermeability and elasticity. It is suitable for creating bonding layers, repairing mortars, floor screeds resistant to abrasion, waterproof cement mortars, mortars resistant to chemicals, plasters with high strength and water impermeability etc.
|Available Size(s)||150 kg||20 kg||5 kg ||1 kg|
|Consumption||Added to mixing water in proportion LATEX to water, 1:1 up to 1:5|
|Coverage Imperial||N/A||N/A||N/A ||N/A|
|Units Per Pallet||3||39||72||324|
Categories: Concrete & Mortar Admixtures, Mortar Admixtures
Paraffin-based water emulsion for protecting fresh concrete from quick evaporation of mixing water. It ensures full hydration of cement, thus reduces any drying shrinkage cracks. It is usually applied on large surfaces of exposed concrete such as industrial floorings, parking areas, concrete slabs etc. In case of subsequent layers on the concrete surface, ISOCURE must be removed by water blasting.
Concrete set retarder and superplasticizer. When added to the ready-mixed concrete, it improves its workability and extends its setting time. Suitable for preparing high-strength concrete, exposed concrete, pumpable concrete etc.
Concrete superplasticizer. When added to ready-mixed concrete, it increases workability without decreasing strength. When added during concrete preparation, it reduces the amount of water required (reduction of w/c ratio), thus increasing both initial and final strength.
Concrete set retarder with plasticizing properties (ASTM C-494 type D, ELOT EN 934-2: T10). It increases setting time of concrete (delays setting) and improves its workability and physical properties. It enables transport of ready-mixed concrete over long distances.