POLYPROPYLENE FIBERS
Product Code: 1327-6
Polypropylene fibers 12 mm long, for reinforcing concrete and mortars.
Features:
Available Color(s) | White | |
Available Size(s) | 900 g | 600 g |
Consumption | 600 - 900 g/m³ of concrete 900 - 1200 g/m³ of mortar | |
Coverage Metric | 1 - 1.5 m³ of concrete 0.75 - 1 m³ of mortar | 0.7 - 1 m³ 0.5 - 0.7 m³ |
Coverage Imperial | 35.3 - 53 ft³ of concrete 26.5 - 35.3 ft³ of mortar | 24.7 - 35.3 ft³ of concrete 17.6 - 24.7 ft³ of mortar |
Units Per Pallet | 784 | 1120 |
Categories: Auxiliary Concreting Agents, Concrete & Mortar Admixtures
Related products
-
ISOCURE-A
Water-based, acrylic emulsion for protecting fresh concrete from quick evaporation of mixing water. It ensures full hydration of cement, thus reduces any drying shrinkage cracks. It is usually applied on large surfaces of exposed concrete such as industrial floorings, parking areas, concrete slabs etc. It is also suitable for vertical surfaces. There is no need for removing ISOCURE-A in case of subsequent layers on the concrete surface.
-
BEVETOL-SPL
Concrete superplasticizer. When added to ready-mixed concrete, it increases workability without decreasing strength. When added during concrete preparation, it reduces the amount of water required (reduction of w/c ratio), thus increasing both initial and final strength.
-
RETADOL
Concrete set retarder with plasticizing properties (ASTM C-494 type D, ELOT EN 934-2: T10). It increases setting time of concrete (delays setting) and improves its workability and physical properties. It enables transport of ready-mixed concrete over long distances.
-
REOTOL-SPL
Concrete superplasticizer. When added to ready-mixed concrete, it increases workability without decreasing strength. When added during concrete preparation, it reduces the amount of water required (reduction of w/c ratio), thus increasing both initial and final strength.