Product Code: 0122-1
Concrete set retarder with plasticizing properties (ASTM C-494 type D, ELOT EN 934-2: T10). It increases setting time of concrete (delays setting) and improves its workability and physical properties. It enables transport of ready-mixed concrete over long distances.
|Available Color(s)||Dark Brown|
|Available Size(s)||1000 kg||250 kg||20 kg |
|Consumption||0.2 - 0.3 kg per 100 kg of cement|
|Coverage Imperial||N/A||N/A||N/A |
|Units Per Pallet||1||2||39|
Categories: Concrete & Mortar Admixtures, Concrete Admixtures
Broad-use concrete set accelerator – antifreezing agent (ELOT EN 934-2: T6). It reduces setting time of concrete (accelerates setting) in cases where working fast is required and allows safe concreting at low temperatures.
Waterproofing admixture for mortars and non-reinforced concrete with plasticizing properties. It is used for waterproofing cement mortars, non-reinforced concrete, renders etc.
Concrete superplasticizer. When added to ready-mixed concrete, it increases workability without decreasing strength. When added during concrete preparation, it reduces the amount of water required (reduction of w/c ratio), thus increasing both initial and final strength.
Water-based, acrylic emulsion for protecting fresh concrete from quick evaporation of mixing water. It ensures full hydration of cement, thus reduces any drying shrinkage cracks. It is usually applied on large surfaces of exposed concrete such as industrial floorings, parking areas, concrete slabs etc. It is also suitable for vertical surfaces. There is no need for removing ISOCURE-A in case of subsequent layers on the concrete surface.