Epoxy-based Materials
-
DUREBOND
Two-component, solvent-free epoxy resin, for bonding fresh concrete to hardened concrete. Also used as an injection resin mortar for repairing concrete cracks wider than 3.0 mm as well as for fixing and anchoring of reinforcing rods in concrete elements etc. It can be perfectly applied even on damp substrates.
-
EPOMAX-ANCHOR
Two component polyester based anchoring adhesive. It does not contain solvents and styrene. Suitable as an anchoring adhesive for reinforced bars, reinforced rods, threaded rods etc.
-
EPOMAX-EK
2-component epoxy putty. Used for bonding concrete and steel, repairing concrete, filling joints and sealing cracks that will be injected with EPOMAX-L10, EPOMAX-L20, DUREBOND.
-
EPOMAX-L10
Two-component, solvent-free epoxy injection resin. It is used to repair concrete cracks 0.5-3.0 mm wide by injection and to install and anchor reinforcing rods into existing concrete elements etc. It can be perfectly applied even on damp substrates.
-
EPOMAX-L20
Two-component, solvent-free epoxy injection resin. It is used to repair concrete cracks 0.1-1.0 mm wide by injection and to install and anchor reinforcing rods into existing concrete elements etc. It can be perfectly applied even on damp substrates.
-
EPOMAX-MT
Three-component, high-strength, pourable, , non-shrinking epoxy grout.
-
EPOMAX-STUCCO
2-component, epoxy putty, extra fine-graded. Ideal for puttying any type of surfaces. It is also used for bonding concrete, steel, stone, wood etc. as well as for restoring damages on concrete and cement mortars. For limited applications, mixing of less quantity of the components A and B is possible, by keeping ratio 1:1 by volume.
-
NOZZLES FOR EPOXY RESIN INJECTIONS
For the injection of EPOMAX-L10, EPOMAX-L20 and DUREBOND epoxy resins into structural elements.
Showing all 8 results