Strengthening & Repairing of Concrete
-
DUREBOND
Two-component, solvent-free epoxy resin, for bonding fresh concrete to hardened concrete. Also used as an injection resin mortar for repairing concrete cracks wider than 3.0 mm as well as for fixing and anchoring of reinforcing rods in concrete elements etc. It can be perfectly applied even on damp substrates.
-
DUROCRET
Polymer-modified cement mortar, suitable for patching and repairing concrete, masonry and plaster, formation of grooves or ridgepoles etc.
-
DUROCRET-DECO
Polymer-modified, fiber-reinforced, microcement coating. It provides excellent adhesion to the substrate, water repellency and abrasion resistance. For interior and exterior use in a variety of applications, on floors and walls, wherever an aesthetic intervention is needed (e.g. Cycladic architecture) in homes, shops, hotels etc. Suitable for special structures such as built-in beds, built sanitary ware (sinks, bathtubs, showers etc.)
-
DUROCRET-DECO FINISH
Polymer-modified, extra fine-grained microcement coating. It provides water repellency and very good adhesion to the substrate. After hardening a smooth final surface is formed. It is used in thin layers (1-3mm) as a microcement coating on cementicious substrates. Suitable for applications such as stairs, floors, walls and special constructions such as built sanitary ware (sinks, showers etc.). It can be applied in homes, hotels or wherever an aesthetic intervention is needed.
-
DUROCRET-DECO FLEX
Flexible, polymer-modified, fiber-reinforced microcement coating. It shows very good bonding to the substrate, water repellency, as well as abrasion resistance and resistance to contraction-expansion and vibration. Suitable for indoor and outdoor applications on gypsum boards, cement boards, in-floor heating floors, metal surfaces, etc.
-
DUROCRET-PENETRATE
Repairing and waterproofing cement mortar. It is suitable for indoor and outdoor applications on concrete, brickwork, for groove formation etc. Also it can be used for the waterproofing of concrete elements, in cases from simple moisture to water pressure. Suitable for waterproofing of basements, foundations, manholes, water tanks, sewage tanks etc.
-
DUROCRET-PLUS
DUROCRET-PLUS is a pre-mixed, polymermodified, fiber-reinforced cement mortar, without corrosive substances, thus suitable for exterior and interior use. DUROCRET-PLUS is used for concrete or brickwork repairs, as well as patching, forming fillets etc.
-
EPOMAX-ANCHOR
Two component polyester based anchoring adhesive. It does not contain solvents and styrene. Suitable as an anchoring adhesive for reinforced bars, reinforced rods, threaded rods etc.
-
EPOMAX-CMT
Three-component, thixotropic epoxy mortar for surface sealing.
-
EPOMAX-EK
2-component epoxy putty. Used for bonding concrete and steel, repairing concrete, filling joints and sealing cracks that will be injected with EPOMAX-L10, EPOMAX-L20, DUREBOND.
-
EPOMAX-L10
Two-component, solvent-free epoxy injection resin. It is used to repair concrete cracks 0.5-3.0 mm wide by injection and to install and anchor reinforcing rods into existing concrete elements etc. It can be perfectly applied even on damp substrates.
-
EPOMAX-L20
Two-component, solvent-free epoxy injection resin. It is used to repair concrete cracks 0.1-1.0 mm wide by injection and to install and anchor reinforcing rods into existing concrete elements etc. It can be perfectly applied even on damp substrates.
-
EPOMAX-LD
Two-component epoxy resin without solvents. Suitable for the impregnation and bonding of synthetic fiber fabrics such as glass fiber or carbon fiber fabrics etc. Used for the structural strengthening or repairing of construction elements like concrete, masonry, wood etc.
-
EPOMAX-MT
Three-component, high-strength, pourable, , non-shrinking epoxy grout.
-
EPOMAX-PL
Two-component epoxy adhesive paste. Suitable for bonding carbon plates used in the structural strengthening of construction elements.
-
EPOMAX-STUCCO
2-component, epoxy putty, extra fine-graded. Ideal for puttying any type of surfaces. It is also used for bonding concrete, steel, stone, wood etc. as well as for restoring damages on concrete and cement mortars. For limited applications, mixing of less quantity of the components A and B is possible, by keeping ratio 1:1 by volume.
Showing 1–16 of 25 results